The 2011 Carve features, 1. Moderately wide shapes blend a classic feel with a degree of wind range, bottom end power and low speed stability 2. An even volume distribution and a longer nose length offers more longitudinal stability 3. Decks are heavily domed to provide full comfort in all strap positions: inboard or outboard 4. Classic vee distribution on the bottom, with more vee in the tail and less vee in the nose 5. New Freeride Power fin (131, 141): relatively thick and stiff, the Freeride Power is very powerful and allows the rider to drive off the fin to accelerate. The fin planes up effortlessly and keeps its power in the lulls. The reduced flex also translates into more control in rough water conditions or high winds, as the fin will help maintain the board flat 6. Dual Flat concept (DFC) rockerlines: the flat section under your feet is the main planing area. The second flat section in the tail provides tail kick to loosen the board, add maneuverability and free up the board, without compromising top speed or acceleration 7. Multiple insert positions offer tuning options for intermediate/advanced/expert riders.
The 2011 Carve comes with a choice of three constructions, Technora, Tufskin and Wood. The Wood carve includes Starboards "ProtectFilm" - UV protection for wood. All constructions are shown in the main pictures above. Wood Construction Developed by Jean Louis Colmas in 1984, Wood Technology became Starboard's trademark construction in 1995. Starboard's production Wood boards then set the lead in lightweight sandwich technology, weighing in at a kilo under the competition, yet with higher impact resistance. A sheet of 0.6 mm Australian plantation pine wood forms the full outer shell of the board. Wood's unique properties are its natural rigidity, superior resistance to compression and higher energy absorption compared to carbon. It is the construction with the highest dynamic shape stability. Advantages: lighter weight, highest dynamic shape stability, rigid flex, quicker response.
Technora A lightweight, stiff and crisp construction providing the highest performance value. TechnoraTM is a special type of high tenacity Aramid fiber with remarkably high tensile strength, high toughness, and high impact-resistant qualities. TechnoraTM reinforcements together with Kevlar®, Carbon and Wood laminates strengthen the skin, nose, and heel areas. All TechnoraTM boards are built with cross-linked PVC sandwich skins and a 14g/l EPS internal core Advantages: light weight, stiff flex, quick response.
Tufskin Maximum durability and value. Tufskin AST technology uses layers of 3-dimensional 400g glass mat wetted out with an expanding epoxy resin system that creates volume within the skin as it cures under pressure. This creates a thick, stiff, and durable sandwiched laminate. A half-deck wood layer improves rigidity and deck impact resistance. Advantages: tough construction, more value, most durable.
Tufskin Maximum durability and value. Tufskin AST technology uses layers of 3-dimensional 400g glass mat wetted out with an expanding epoxy resin system that creates volume within the skin as it cures under pressure. This creates a thick, stiff, and durable sandwiched laminate. A half-deck wood layer improves rigidity and deck impact resistance. Advantages: tough construction, more value, most durable. The 2011 Carve comes in five sizes, allowing a variety of riders to get going despite their levels. The specifications for the board are shown below.
View cart when finished
