3 Fin Wave Thruster
The link with surfing has always been a great inspiration for the wave sailors. The standard surfing fin set up is now available on wave sailboard that is specifically designed to replicate the accuracy and sharpness of surfing turns on the wave face. Try to believe.
Features
The outline maximum width is moved towards the tail. More curved outline tail design in combination with a straight rocker and a simple V hull configuration creates a deck “fulcrum” area in the middle of the straps. The tri fin set up moves the bottom pressure point forward to fall closer to the deck one, so as to make every turn “pivoting” on these two pressure points that fall in perfect balance. A pleasure for both onshore and side-shore sailing. A new fast and early planning board that will feel secure as a single fin but “turny” and radical as a surfboard.
Below are a series of close-up images of the Wave Thruster.
EXCLUSIVE Custom-made full sandwich with Biaxial Glass, which give us best results in terms of weight/strength. We kept Epoxy/Herex 100 stringers on bottom of the thinnest boards (mainly 68 and 76).
The 2011 Wave Thrster comes in three sizes, fit for all. The specifications for the boards are shown below.
Model: WaveThruster Ltd 68
Volume (lts): 68
Size (cms): 230x53
Fin: MFC TF center 16.5 US + SF 8 M
R-S-S: 3.2/4.7
Weight ± 6% in Kgs: 6.0
Model: WaveThruster Ltd 76
Volume (lts): 76
Size (cms): 231x56
Fin: MFC TF center 17 US + SF 8 MT
R-S-S: 3.7/5.3
Weight ± 6% in Kgs: 6.2
Model: WaveThruster Ltd 84
Volume (lts): 84
Size (cms): 232x58.5
Fin: MFC TF center 17.5 US + SF 8 MT
R-S-S: 4.2/6.0
Weight ± 6% in Kgs: 6.6
View cart when finished
