// freestyle performance. If freestyle or high performance twin riding is your aim then the NHP is
sure to please. It started with the 2008 666 in mind and set out to achieve two major improvements.
A significant reduction in spray produced in certain water conditions, so increasing rider comfort, and increased versatility without compromising the top end performance of the range. To reduce unwanted spray a re -designed unique Hydrodynamic Rocker Line has increased the tip lift. The heel-side outline has been tweaked and the footstrap inserts moved inboard a fraction to ensure minimal interference with water release on the rail – a major cause of spray.
Versatility has been enhanced by utilizing a new Dynamic Asymmetrical Outline. This has focused mainly on the toe-side edge, which means that the test winning rail grip, early planing and upwind ability of the 666 all remain.
The new NHP offers unheard of levels of fun in an unashamedly high performance board.
- Modified hydrodynamic rocker dramatically reduces spray in choppy water
- Dynamic Asymmetrical Outline increases versatility and comfort
- Wider stance options for more stable riding position
- Fin Shims for stronger fin/board connection
- New widths allow the perfect size for every rider
- Same award winning grip, early planning and POP as 2008
- PKRA podium finish performance proven courtesy of Team rider Mike Blomvall
- 3 year warranty against breakage
| NHP |
length |
width |
core |
inserts |
stance |
footbed |
fin size |
profilers |
fin material |
bag |
| NHP |
125 |
38 |
CAV |
M6 |
41-46CM |
yes |
55mm |
yes |
G10 epoxy |
NO |
| NHP |
128 |
39 |
CAV |
M6 |
341-46CM |
yes |
55mm |
yes |
G10 epoxy |
NO |
| NHP |
131 |
40 |
CAV |
M6 |
41-46 |
yes |
55mm |
yes |
G10 epoxy |
no |
| NHP |
134 |
42 |
CAV |
M6 |
41-46CM |
yes |
55mm |
yes |
G10 epoxy |
no |
| NHP |
137 |
44 |
CAV |
M6 |
41-46CM |
yes |
55mm |
yes |
G10 epoxy |
no |
| 666 WOMENS |
125 |
38 |
CAV |
M6 |
36-41CMCM |
yes |
55mm |
yes |
G10 epoxy |
no |
|
Nobile's NHP is the new name for the 666 series boards.
A two step rocker, this board is highly efficioent, designed as a freestyle board to use smaller kites for more radical tricks without having to deal with full power kites.
For 2009 the NHP has the assymmetric outline and a new rockerline to make it far easier to ride in difficult conditions.
This is what Nobile say about the 666; The Human Concept - Dynamic Assymetrical OutlineYou can’t escape the fact that our kite-boarding stances are not symmetrical; can you ride the same on your toe side and heel side edges? If not, then you have to ask yourself why your board has the same outline and fin position on the heel side and toe side edges. Nobile’s Dynamic Asymmetrical Outline is designed around our Human Concept, performance that is destined to enhance and work in harmony with your natural physiology, not fight against it. We’ve tailored the outline on your stronger heel side rail to have more grip, better upwind performance and maximum POP. On the weaker toe side, we’ve increased the curve radius and bought the fins closer to your feet improving the carving potential and comfort factor of the board when riding switch whilst at the same time radically decreasing the foot pressure needed to hold your edge.Fin ShimsNo matter how carefully you ride anyone can have an accidental contact with the beach or other solid objects, the resulting board damage and fin loss can be frustrating not to mention ruining a good session. Our new Fin shims distribute the load placed on the heads of the screws across the wider surface of the deck of the board protecting your board from damage in all but the most extreme situations. In addition for 2009 we increased the length of the fin. Elliptical Progressive ConcaveExclusively featured on all Nobile kiteboards since we introduced the concept in 2006, our Elliptical Progressive Concave combines the advantages of both a flat-bottomed board and concave. The tail area of the board is completely flat allowing the board to flex in the controlled fashion defined by us during testing to enhance control, comfort and performance whilst the centre section of the board has up to 5mm of concave providing earlier planning, extra rail grip and a smoother ride.Hydrodynamic Rocker lineA conventional rocker with it’s flatter centre section and increasing radius towards the tail causes the water to accelerate along it’s length as the distance it has to travel increases, this acceleration causes drag on the board. Our hydrodynamic rocker contains most of it’s radius in the centre of the board. The straight section enables the water to maintain it’s direction of travel all the way along the bottom of the board thus the drag from the water is reduced to a minimum as it’s travelling the shortest distance possible. For 2009 we increased the lift in the tips of the Hydrodynamic rocker line, this subtle change increases versatility (particularly when switching from heel side to toe side) and dramatically reduces unwanted spray whilst maintaining all other benefits the 666 hasbecome famous for.Complete Anti-vibration ControlIt’s a little known fact that proper flex control in a kiteboard is not solely restricted to the decks overall deflection in response to pressure. Variable flex zones, flex response speeds and vibration control are all equally important factors. Fast flex response speeds can raise the performance characteristicsof a board but can cause rail 'chatter' at speed leading to a loss of rail grip and a general lackof comfort. Reducing this 'chatter' or vibration through the use of advanced core materials and laminates provides exceptional rail grip in all conditions and increases ride comfort and control.UV Resistant FoilsHaving the best performing (and best looking?) board on the market won’t stop the feelings of disappointment if the colours start to fade after 6 months use. Our UV resistant foils ensures your board will look as good in six months as the day it came out of the wrapper.Tip Rocker ProfilersEvery Nobile Twin tip is supplied with our patented Tip Rocker Profilers. Whilst theories abound regarding the purpose of these small white profilers the answer is simple. Should you have trouble with excessive spray in your face, simply insert the profilersbetween the heel side fins and the board. This will slightly alter the board's trim angle eliminating the spray from your eyes whilst riding.3-D Top MouldNobile was the pioneer of 3-D Top Mould design in kiteboarding and we continue to research and improve the technology. 3-D Top moulds allow us to control precisely the flex pattern in all of our boards (both end to end AND torsional flex) as well as controlling the movement in the various different Flex zones.
|
Nobile IFS-PRO the worlds first triple density footbed.
The IFS system introduced at the start of the 2008 year model is still going strong, but for the last year or so Mark Shinn and the Nobile team have been working on an updated and uprated pro model. High end riders who were forwarding their riding further and further have been pushing the Standard IFS as far is it will go and a new uprated model was required! The result is the IFS-Pro as seen below and we have just seen the first delivery into the UK.
The IFS pro is manufactured in a trainer factory (running and sport shoes) and is the first triple density (three different core components) pad, designed to offer high level shock absorption, maximum comfort, and total foot stability.
There is a lot to the footbed and strap that misses the eye on first glance. The visual aspect is always important but it the technology behind what you see is ultimately far more imortant and that has had a huge amount of work.. for example;
- The IFS is made in a specific 3D CNC'd moulds, shaped to your foot as opposed to a flat block of foam that is shaped by sanding. This construction allows very precise control and cost effective detailed moulding of the core materials.
- It uses three different density cores, which;
Shape compression areas; to ensure you always have reserve compression for extremely high impacts on already heavy loadings, saving both board and joint damage,
Support distribution loadings, to make sure the harder you push the more locked in your feet stay. Infact, when the pad is loaded it pushes your foot further into the strap and pad to make sure you stay locked in.
Allow soft skin compression, which makes you foot nestle into position keeping the board on your feet during zero loading (ie jumping).
- It also uses a new technology of footstrap. The IFS pro strap core is a heat formed polyurethane molding much like a trainer base, but with far less density. Normal straps are made with solid flat material, shaped in 2D but not in thickness or form. If you look closely at the IFS strap you will see the internal construction is very advanced offering new technology in support, comfort and security. Now both upper and lower sections of the IFS base are specifically molded to wedge your foot in place.
The pad is designed for the nobile boards, but can be used on any other board that has a distance between the centre of the footstrap inserts of 15.5cm.
All nobile boards are now available with or without the IFS pro, which is an option at £20 extra. The price for the IFS Pro footbed system sold separately is £69.95
View cart when finished
